N2818A 200 MHz 10:1 Differential Probe with AutoProbe
N2818A 200 MHz 10:1 Differential Probe with AutoProbe  Oscilloscope Probes  Keysight Technologies Malaysia, Singapore, Penang, Johor Bahru (JB), Selangor, Sarawak Distributor, Supplier, Supply, Supplies | ELSO Technologies Sdn Bhd

Key Features & Specifications

  • Wide dynamic range for various applications: ±20V differential, ±60V common mode 
  • High input resistance and low input capacitance for low probe loading: 1 MΩ//3.5 pF between inputs
  • Direct connection to AutoProbe interface (no power supply required)
  • Ideal for high-speed power measurements, digital differential buses and vehicle serial buses (CAN, LIN, FlexRay)
     

Description

The N2818A differential probe provides superior high-speed differential signal measurements required for today’s high-speed power measurements, vehicle bus measurements and high-speed digital system designs. The N2818A differential probe offers 10:1 attenuation setting, allowing it to be used for a broad range of applications. The probe comes with a pair of alligator clips and hook tip clips for use with large and small components in tight places. The differential probe has an input resistance of 1 MΩ and low input capacitance of 3.5 pF to minimize circuit loading. The N2818A probe is compatible with select InfiniiVision and Infiniium oscilloscopes with 50 Ω AutoProbe interface input. The probe is powered directly by the InfiniiVision and Infiniium AutoProbe interface. For use with non-AutoProbe input oscilloscope, use the N2792A.

When probing differential signals inside of environmental chambers at extreme temperatures, Keysight offers the N7013A extreme temperature extension kit. The N7014A is compatible with the N2818A with a de-rated bandwidth of 70 MHz. The 70 cm long differential cable set and accessories can operate in temperatures ranging from -40 degrees to +85 degree Celsius.


Please leave your enquiry here, we will reply as soon as possible.

Switch To Desktop Version