XR Series 2 kW to 10 kW

XR Series 2 kW to 10 kW

Share:


XR Series 2 kW to 10 kW

Features
High Frequency IGBT-based Switch-Mode Design

The XR Series utilizes the latest IGBT devices to drive down size and increase performance. The high frequency design delivers fast transient response and low output ripple. This performance coupled with Magna-Power's rugged current-fed power processing, enables confidence in even the most demanding applications.
 

Fully Programmable Power

All XR Series functions and features of are available and programmable from a variety of control methods, including:

  • Stepless front panel knobs
  • 37-pin isolated analog-digital I/O
  • Computer interface with software and drivers

Various programming interfaces are available, such as LXI TCP/IP Ethernet (+LXI), IEEE-488 GPIB (+GPIB), Edgeport USB, Accessory (+USB), RS485 Accessory (+RS485).
 

Model Ordering Guide

Models Chart

The following chart details the available standard XR Series models. The Current Maximum (Adc) column is separated by the available power levels. To determine the appropriate model, first select your output Voltage Maximum (Vdc) to find appropriate row. Next, select one desired Current Maximum from the row that contains your desired Voltage Maximum. Then, construct your model number according to the model ordering guide, above. Non-standard voltage and current configurations are available.
 

2 kW 4 kW 6 kW 8 kW 10 kW    
Voltage Maximum Current Maximum Ripple* (mVrms) Efficiency (%)
5 375 600 N/A N/A N/A 50 86
10 200 375 600 N/A N/A 50 86
16 125 250 375 500 600 50 86
20 100 200 300 375 500 45 86
25 80 160 240 320 400 45 86
32 62 124 186 250 310 40 86
40 50 100 150 200 250 40 87
50 40 80 120 160 200 50 87
60 33 66 100 133 166 60 87
80 25 50 75 100 125 60 87
100 20 40 60 80 100 60 87
125 16 32 48 64 80 100 87
160 12 24 36 50 60 120 87
200 10 20 30 40 50 125 87
250 8 16 24 32 40 130 88
300 6.6 13.2 19.8 26.4 33.3 160 88
375 5.3 10.6 15.9 21.3 26.5 170 88
400 5.0 10.0 15.0 20.0 25 180 88
500 4.0 8.0 12.0 16.0 20 220 88
600 3.3 6.6 9.9 13.3 16.5 250 88
800 2.5 5.0 7.5 10.0 12.5 300 88
1000 2.0 4.0 6.0 8.0 10 350 88
1250 1.6 3.2 4.8 6.4 8.0 375 88
1500 1.3 2.6 4.0 5.3 6.6 400 88
2000 1.0 2.0 3.0 4.0 5.0 450 88
4000 0.50 1.00 1.50 2.00 N/A 6500 88
6000 0.30 0.66 1.00 1.33 N/A 7500 88
8000 0.25 0.50 0.75 1.00 N/A 8500 88
10000 0.20 0.40 0.60 0.80 N/A 9500 88
  Input Current Per Phase (Aac)    
208/240 Vac, 1Φ 16 N/A N/A N/A N/A    
208/240 Vac, 3Φ 8 15 22 29 36    
380/415 Vac, 3Φ 5 9 13 17 21    
440/480 Vac, 3Φ 4 8 11 15 18
 

Specifications

Input Specifications
Nominal Voltage
3 phase, 3 wire + ground
208 VAC (operating range 187 - 229 VAC)
240 VAC (operating range 216 - 264 VAC)
380 VAC (operating range 342 - 440 VAC)
415 VAC (operating range 373 - 456 VAC)
440 VAC (operating range 396 - 484 VAC)
480 VAC (operating range 432 - 528 VAC)
1 phase, 2 wire + ground
(2 kW models only)
208 VAC (operating range 187 - 229 VAC)
240 VAC (operating range 216 - 264 VAC)
Frequency 50 Hz through 400 Hz
Power Factor Greater than 92% at maximum power
Output Specifications
Ripple See Model Charts
Line Regulation Voltage Mode: ± 0.004% of full scale
Current Mode: ± 0.02% of full scale
Load Regulation Voltage Mode: ± 0.01% of full scale
Current Mode: ± 0.04% of full scale
Load Transient Response 2 ms to recover within ±1% of regulated output with a 50% to 100% or 100% to 50% step load change
Efficiency ≥ 86% (See Model Charts)
Stability ± 0.10% for 8 hrs. after 30 min. warmup
Isolation User inputs and outputs: referenced to earth ground
Maximum input voltage to ground: ±2500 Vac

Maximum output voltage to ground:
  • Models ≤1000 Vdc: ±1000 Vdc
  • Models >1000 Vdc and ≤2000 Vdc: ±(2000 Vdc + Vo/2)
  • Models >2000 Vdc: No output isolation, specify positive or negative output polarity
Maximum Slew Rate Standard Models:
100 ms for an output voltage change from 0 to 63%,
100 ms for an output current change from 0 to 63%.
With High Slew Rate Option (+HS) and models > 2000 Vdc:
4 ms for an output voltage change from 0 to 63%,
8 ms for an output current change from 0 to 63%.
Bandwidth Standard Models:
3 Hz with remote analog voltage programming,
2 Hz with remote analog current programming.
With High Slew Rate Option (+HS) and models > 2000 Vdc:
60 Hz with remote analog voltage programming,
45 Hz with remote analog current programming.
Physical Specifications
Power Size (H" x W" x D") Rack Units Weight
2 kW 3.50" x 19" x 24" (8.89 x 48.26 cm x 60.96) 2U 45 lbs (20.41 kg)
4 kW 3.50" x 19" x 24" (8.89 x 48.26 cm x 60.96) 2U 47 lbs (21.32 kg)
6 kW 3.50" x 19" x 24" (8.89 x 48.26 cm x 60.96) 2U 48 lbs (21.77 kg)
8 kW 3.50" x 19" x 24" (8.89 x 48.26 cm x 60.96) 2U 48 lbs (21.77 kg)
10 kW 3.50" x 19" x 24" (8.89 x 48.26 cm x 60.96) 2U 48 lbs (21.77 kg)
Control Specifications
Voltage Programming Accuracy ± 0.075% of full scale voltage
OVT Programming Accuracy ± 0.075% of full scale voltage
Current Programming Accuracy ± 0.075% of full scale current
OCT Programming Accuracy ± 0.075% of full scale current
Voltage Readback Accuracy ± 0.2% of full scale voltage
Current Readback Accuracy ± 0.2% of full scale current
External Analog Programming and Monitoring Levels 0 - 10 Vdc
External Analog Output Impedances Voltage output monitoring: 100 Ω
Current output monitoring: 100 Ω
+10 Vdc reference: 1 Ω
External Digital Programming and Monitoring Limits Input: 0 to 5 Vdc, 10 kΩ input impedance
Output: 0 to 5 Vdc, 5 mA drive capacity
Remote Sense Limits 3% maximum voltage drop from output to load
Environmental Specifications
Ambient Operating Temperature 0°C to 50°C
Storage Temperature -25°C to +85°C
Humidity Relative humidity up to 95% non-condensing
Temperature Coefficient 0.04%/°C of maximum output voltage,
0.06%/°C of maximum output current.
Air Flow Side air inlet, rear exhaust